Glacier Bay 67070-3301 Installation Guide download pdf (Page 6)

Installation (continued)

Installing the escutcheon

□ Screw the bolts (G) into the escutcheon (E) and

ensure that the base plate (F) is pressed onto

the escutcheon (E) before the escutcheon (E)

is installed over the three holes in the sink.

□ From underneath sink, hand tighten the

mounting nuts (H). Do not overtighten.

Installing the faucet assembly

NOTE: Do not feed the hose (1) back down through the

spout until step 6.

□ Retract the hose (1) up through the faucet body,

until the hose tting is ush with the bottom of

the shank (2). Do not pull the hose tting past

the shank.

□ Insert the faucet assembly (A) through the hole

in the escutcheon (E).

NOTE: If the sink is uneven, use silicone under the base

plate (F).

NOTE: This step is for escutcheon installation (optional).

If the escutcheon will not be used, install the faucet

assembly as described in step 2.

NOTE: This step is for escutcheon installation (optional).

If the escutcheon will not be used, install the faucet

assembly as described in step 2.

1 2 3 4 5 6 7 8 9 10 11 ... 32 33

No comments

Glacier Bay 67070-3301 Installation Guide Page 6