Glacier Bay 7032EC-A8102 Installation Guide download pdf (Page 5)

HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

Installation (continued)

Installing the drain body

□ Apply silicone sealant (not included) under the

drain ange (E) and place the drain ange (E)

into the drain hole of the sink.

□ From underneath the sink, screw the drain

body (H) onto the drain ange (E). Ensure that

the opening (1) for the ball rod on the drain

body (H) faces towards the rear of the sink.

Installing the stopper and ball

rod

□ Insert the stopper (D) into the drain hole in the sink.

□ Remove the lift rod strap (M) and spring clip (K)

from the ball rod (J).

□ For easier removal and cleaning, rotate the

stopper (D) 90 degrees so that the ball rod (J)

does not go through the hole in the stopper (D).

See insert 2.

□ Tighten the rubber washer (F) and lock nut (G)

on the drain body (H). Do not overtighten.

SILI

□ Secure the ball nut (I) against the hole in the drain

body (H) and tighten the ball nut (I) onto the

threaded end. Do not overtighten.

□ Remove the ball nut (I). Insert the ball rod (J) into

the drain body (H) and through the hole of the

stopper (D). See insert 1.

Insert 2

Insert 1

NOTE: In shallow cabinet installations, the ball rod (J) may

need to be shortened. Use a hack saw to cut the end of the

rod, away from the ball, to the desired length.

1 2 3 4 5 6 7 8 9 10 ... 19 20

No comments

Glacier Bay 7032EC-A8102 Installation Guide Page 5